DEFINITION
Acrylic emulsion based, white interior ceiling paint.
AREAS OF USE
Product is intended for application on leveled cement-based plaster and
exposed concrete at inner surfaces of all buildings as well as cementboards, gypsum plaster, gypsum block, plaster board surfaces, glass
textile, and old painted surfaces.
ADVANTAGES
It is easy to prepare and apply. It is ready to use. Provides high adherence
for concrete and plastered surfaces. It is not affected by temperature
differences.
SURFACE PREPARATION
Application surface must be clean, dry, smooth, and solid. Cement-based plasters, gypsum plaster, gypsum plasterboard, gypsum block surfaces should be primed with a single layer of BEYFIX SATIN PLASTER PRIMER, and waited at least 6 hours before applying BEYFIX INTERIOR CEILING PAINT.
INSTRUCTIONS OF USE
BEYFIX INTERIOR CEILING PAINT should be diluted by 20-20% with water in volume and mixed thoroughly until becoming homogeneous before proceeding with application. Product should be applied in two- layers by means of brush or roller and at least 2 hours should be waited before 2nd layer. Ambient and surface temperature should be at least 5°C during and 24 hours after application.
PACKAGE
3.5- 10– 17.5 -20 kg of plastic container.
STORAGE AND SHELF LIFE
Maximum 4 buckets could be superimposed in closed original packaging
and under cool and dry ambient. Shelf life is 12 months under proper
storage conditions after manufacturing date.
SAFETY PRECAUTIONS
P102: Keep out of reach of children
P262: Do not allow contacting with eyes, skin, or clothing.
P391: Collect the spillage.
P301+P312: IF SWALLOWED: If you don’t feel well, call 114 - NATIONAL POISON ADVICE CENTER or the doctor / physician.
QUALITY STANDARD
Complies with TS 5808 / JUNE 2012 Standard.
It complies with G Communique..
Appearance | White |
Consumption | 0.150-0,200 kg/m2 (single layer) Depending on roughness and absorptivity of surface. |
Drying period | 2 hours before applying 2nd layer, 24 hours for through-dry-state (23 °C) 8-9 |
Application Temperature | +5°C to +35°C |
Dilution rate | 25% (in volume, with water) |
Grain size | S1 (≤100 μm) |
Brightness | G3 (85° 5≤G≤10) |
Wet rubbing strength | Class 4 WRS < 70 < 70 |
Covering Power | Class 2 --,5 -10m2/lt |
Mold strength | K2 |
Above given values are valid for ambient temperature of +23 °C and relative humidity of 50%.
"Yıldırımlar Demir Cement", a corporate and domestic organization that has served the industry in the field of building materials supply since the 1950s, has accomplished successful works in many different sectors as a group.
Beyfix Construction Chemicals,
Keskin Organized Industrial Zone 4 Sk. No:8 KIRIKKALE
Tel: +90 (318) 225 20 02
info@beyfix.com