Energy consumption will decrease with jacketing!
5 January 2019
No Comments
DEFINITION
It is cement-based coarse repair mortar.
AREAS OF USE
It is used as a repair mortar in the repair and plastering of interior and exterior surfaces such as exposed concrete and prefabricated concrete, to provide smooth surface before finishing or waterproofing such as ceramic works.
ADVANTAGES
It creates a smooth and solid surface. After it is set, it is resistant to frost, and extreme water and weather conditions. It can be applied up to a thickness of 5-30 mm.
SURFACE PREPARATION
Application surface should be clean and free of loosen surfaces and dust, which prevent adhesion. Before application, the broken parts of old concrete surfaces should be cut vertically, the surfaces should be roughened and moistened. Water accumulation should not be allowed. Reinforcement pastes should be removed. Molds must be well fixed and sealed.
INSTRUCTIONS OF USE
25 kg of BEYFIX COARSE REPAIR MORTAR is slightly poured into 5-5,5 l of water at ambient temperature between + 5 °C and +35°C and mixed by a mixer with low revolution (400-600 rpm) to obtain a homogeneous mixture. The mortar is left to mature by 5-10 minutes, after which it is further mixed by 1-2 minutes before starting application. Prepared mortar should be filled into application area by applying pressure with a steel trowel and should be applied to entire surface in equal thickness, not exceeding 30mm. Mortar should be consumed within 45 minutes. Surface should be smoothed with a damp sponge and moistened at intervals for 24 hours after the application. Expired and sloughed mortars should not be used.
PACKAGE
It is 25 kg kraft sack. (PE reinforced)
64 bags of shilling in one pallet (106 x 106 cm)
STORAGE AND SHELF LIFE
Maximum 2 palettes could be superimposed in closed original packaging and under cool and dry ambient. Shelf life is 12 months under proper storage conditions after manufacturing date.
SAFETY PRECAUTIONS
Gloves should be used during application. Areas contacted to product should be washed with plenty of water. If swallowed, call for medical, immediately.
QUALITY STANDARD
It complies with TS EN 1504-3 April 2008. R2 – Non-structural repair mortar class.
It complies with CE Communique..
| Appearance | Gray colored powder |
| Mixing Ratio | 5-5.5 l of water / 25 kg of powder |
| Consumption | 2 kg/m2 (for a thickness of 1 mm) |
| Application Temperature | +5°C to +35°C |
| Dwell Time in container | 45 minutes |
| Pressure strength | ≥15 MPa |
| Bending strength | ≥ 4N /mm2 (after 28 days) |
| Bond formed by adhesion | ≥0,8 MPa |
| Constrained shrinkage - expansion | ≥0,8 MPa |
| Capillary water absorption | ≤0,5 kg/ m2.h0,5 |
| Application thickness | 5-30 mm (single layer) |
* Above given values are valid for ambient temperature of +23 °C and relative humidity of 50%. Time gets shorter at high temperatures and longer at low temperatures.
"Yıldırımlar Demir Cement", a corporate and domestic organization that has served the industry in the field of building materials supply since the 1950s, has accomplished successful works in many different sectors as a group.
Beyfix Construction Chemicals,
Keskin Organized Industrial Zone 4 Sk. No:8 KIRIKKALE
Tel: +90 (318) 225 20 02
info@beyfix.com
English 
Turkish 
Russian