{"id":371,"date":"2019-01-10T20:41:32","date_gmt":"2019-01-10T17:41:32","guid":{"rendered":"http:\/\/www.nescoat.com\/?post_type=portfolio&p=371"},"modified":"2022-03-19T12:03:45","modified_gmt":"2022-03-19T09:03:45","slug":"beyfix-yari-esnek-su-yalitim-malzemesi","status":"publish","type":"product","link":"https:\/\/www.beyfix.com\/en\/magaza\/yapi-kimyasallari\/surme-esasli-su-yalitim-malzemeleri\/beyfix-yari-esnek-su-yalitim-malzemesi\/","title":{"rendered":"SEMI-ELASTIC WATER\nINSULATION MORTAR"},"content":{"rendered":"

DEFINITION<\/strong>
\nCement-based, polymer-modified, double-component, full elastic sliding waterproofing material.
\nAREAS OF USE<\/strong>
\nIt is used to provide water insulation at basement and foundation walls, housings, malls, water depots, small decorative pools, balconies and small terraces, retaining walls, wet areas such as bathrooms, toilets, kitchens by coating.
\nADVANTAGES<\/strong>
\nIt is easy to prepare and apply. It is resistant against freeze, water, and heavy weather conditions after cured. It can be applied by means of brush, roller, or sprayer.
\nSURFACE PREPARATION<\/strong>
\nApplication surface should be clean and free of loosen surfaces and dust, which prevent adhesion. Corrupt surfaces, cracks, and fractures should be repaired with BEYFIX fine repair mortar and BEYFIX rough repair mortar 24 hours before application. Surface should be moistened before applying adhesive mortar. Before applying onto surfaces with high liquid absorption capacity such as gypsum or gypsum board and onto old ceramic-coated surfaces an appropriate BEYFIX surface primer should be applied.
\nINSTRUCTIONS OF USE<\/strong>
\nBEYFIX SEMI FLEX WATERPROOFING MATERIAL Component A is slightly poured onto 10 kg of BEYFIX SEMI FLEX WATERPROOFING MATERIAL Component B at ambient temperature between + 5 \u00b0C and +35\u00b0C and mixed by a mixer with low revolution (400-600 rpm) to obtain a homogeneous mixture. The mortar prepared is left to mature by 5-10 minutes, after which it is further mixed by 1-2 minutes before starting application. Mortar is applied onto pre-moistened surface in 2 or 3 layers by means of hard brush or roller. Depending on ambient temperature, 5-6 hours should be waited between layers and lower layer should be ensured to dry before passing to upper layer. Mortar prepared should be consumed in 1 hour. Direction of brush should be in right angle with that of lower layer. Surfaces of application should be protected against direct sunlight, wind, and freeze by 3 days after application and coated by ceramic at the end of this period.
\nPACKAGE<\/strong>
\n1st Component: It is 20 kg kraft sack. (PE reinforced)
\n2nd Component is in 10 kg of plastic container
\nSTORAGE AND SHELF LIFE<\/strong>
\nMaximum 2 palettes could be superimposed in closed original packaging and under cool and dry ambient. Shelf life is 12 months under proper storage conditions after manufacturing date.
\nSAFETY PRECAUTIONS<\/strong>
\nGloves should be used during application. Areas contacted to product should be washed with plenty of water. If swallowed, call for a physician, immediately.<\/p>\n

QUALITY STANDARD<\/strong>
\nIt complies with TS EN 1504-2 APRIL 2008
\nCE Communique..<\/p>\n\n\n\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
Appearance<\/td>1. Component A: Gray Powder
\n2. Component B: White liquid<\/td>\n<\/tr>\n
Mixing Ratio<\/td>20 kg powder \/ 10 kg liquid<\/td>\n<\/tr>\n
Consumption<\/td>2 kg\/m2 (for a thickness of 1\nmm)<\/td>\n<\/tr>\n
Density of Mortar<\/td>1,80 g\/cm<\/td>\n<\/tr>\n
Application Temperature<\/td>+5\u00b0C to +35\u00b0C<\/td>\n<\/tr>\n
Dwell Time in container<\/td>1 hours<\/td>\n<\/tr>\n
Dwell Time for each layer<\/td>5-6 hours<\/td>\n<\/tr>\n
Open Dwell time in\ncontainer<\/td>About 50 minutes at 20\u00b0C<\/td>\n<\/tr>\n
Impermeability<\/td>\u2265 1.5 bar<\/td>\n<\/tr>\n
Adhesion strength (at 28 days)<\/td>\u22650.5 N\/mm2<\/td>\n<\/tr>\n
Crack bridging:<\/td>\u2265 0,75 mm<\/td>\n<\/tr>\n
Capillary water absorption<\/td>\u2264 0,1 kg\/m2h0-5<\/td>\n<\/tr>\n
Coating period<\/td>3 Days<\/td>\n<\/tr>\n
Time to become water-proof<\/td>7 Days<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

TANIM \u00c7imento esasl\u0131, polimer modifiyeli, \u00e7ift bile\u015fenli, tam elastik kaymaz su yal\u0131t\u0131m malzemesidir. KULLANIM ALANLARI Bodrum ve temel duvarlar\u0131nda, konutlarda, al\u0131\u015fveri\u015f merkezlerinde, su depolar\u0131nda, k\u00fc\u00e7\u00fck dekoratif havuzlarda, balkon ve k\u00fc\u00e7\u00fck teraslarda, istinat duvarlar\u0131nda, banyo, tuvalet, mutfak gibi \u0131slak hacimlerde kaplama yaparak su yal\u0131t\u0131m\u0131 sa\u011flamak i\u00e7in kullan\u0131l\u0131r. AVANTAJLAR Haz\u0131rlanmas\u0131 ve uygulanmas\u0131 kolayd\u0131r. K\u00fcrlendikten sonra dona, suya […]<\/p>","protected":false},"featured_media":759,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[71,69],"product_tag":[],"_links":{"self":[{"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/product\/371"}],"collection":[{"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/comments?post=371"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/media\/759"}],"wp:attachment":[{"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/media?parent=371"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/product_cat?post=371"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.beyfix.com\/en\/wp-json\/wp\/v2\/product_tag?post=371"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}