DEFINITION

Cement-based joint filling mortar for tiles and ceramics.

AREAS OF USE

For horizontal and perpendicular joints of coating materials such as ceramic, tile, natural stone, glass mosaic, granite, etc at inner spaces and for horizontal joints at outdoor spaces. It can be used safely for the joints within range of 1-6 mm.

ADVANTAGES

It causes no crack after curing in joints up to 6 mm.. It is easy to prepare and apply. It provides a smooth surface. Wear resistant. Time to process and work with is long. SURFACE PREPARATION

SURFACE PREPARATION

Joint areas should be cleaned from dust, cement, and other residuals before application. To this end, joints should be scraped by means of thin stick and brushed. Joint gaps should be moistened under dry and hot ambient conditions, especially in perpendicular plane.

INSTRUCTIONS OF USE

20 kg of BEYFIX JOINT FILLING MORTAR is slightly poured into 6-6,5 l of . water at ambient temperature between + + +5 °C and +35°C and mixed by a mixer with low revolution (400-600 rpm) to obtain a homogeneous mixture. The mortar prepared is left to mature by 5-10 minutes, after which it is further mixed by 1-2 minutes before starting application. It must be given special attention to that adhesive must have cured before application. Mortar is to be filled into surface by means of rubber spatula in parallel and then cross movements, after which the residuals are scraped from surface. Depending on ambient temperature, the surface is to be wiped by means of moist sponge before material losses water and gets dry (20-30 minutes later than application). Residuals on the surface should be wiped out by dry cloth when BEYFIX JOINT FILLING MORTAR is still wet. Cleaning agents such as bleacher, muriatic acid, lime remover, etc should not be applied to joint gaps in order to revent being damaged of colored joint sealant.

PACKAGE

It is 20 kg craft bag. (PE reinforced) 80 bags of shilling in one pallet (106 x 106 cm)

STORAGE AND SHELF LIFE

Maximum 2 palettes could be superimposed in closed original packaging and under cool and dry ambient. Shelf life is 12 months under proper storage conditions after manufacturing date.

QUALITY STANDARD

It complies with TS EN 13888 standard CGI class.

C: Cement-based

G: Joint sealant

1: Standard performance

Conforms to CE Communiqué