+90 318 225 20 02

MINERAL EXTERIOR SIDING

MINERAL EXTERIOR SIDING

DEFINITION
Cement based, medium textured decorative exterior siding.
AREAS OF USE
It is used as a decorative top coating on thinly plastered and coarse plastered surfaces on all exterior facades and external thermal insulation systems.
ADVANTAGES
It has ability to breathe thanks to its vapor permeability. It is decorative. It is waterproof.: It is resistant to severe weather conditions. Its adhesion strength is high. It can be painted with exterior paints.
SURFACE PREPARATION
Application surface should be clean and free of loosen surfaces and dust, which prevent adhesion. Before application, the broken parts of old concrete surfaces should be cut vertically, the surfaces should be roughened and moistened. Water accumulation should not be allowed. Reinforcement pastes should be removed. Molds must be well fixed and sealed.
INSTRUCTIONS OF USE
25 kg of BEYFİIX MINERAL EXTERIOR SIDING is slightly poured into 6-6,5 l of water at ambient temperature between + 5 °C and +35°C and mixed by a mixer with low revolution (400-600 rpm) to obtain a homogeneous mixture. Prepared mortar is left to mature by 5-10 minutes, after which it is further mixed by 1-2 minutes before starting application. After mortar is spread on the surface in equal thickness with a steel trowel, a pattern is given with circular movements with a plastic trowel. Patterning should be done while the BEYFIX MINERAL EXTERIOR SIDING is wet. Prepared mortar is consumed within 3 hours, the mortar that has expired is not applied. Application should be done at once on interconnected surfaces.
PACKAGE
It is 25 kg craft bag. (PE reinforced)
64 bags of shilling in one pallet (106 x 106 cm)
STORAGE AND SHELF LIFE
Maximum 2 palettes could be superimposed in closed original packaging and under cool and dry ambient. Shelf life is 12 months under proper storage conditions after manufacturing date.
SAFETY PRECAUTIONS
Gloves should be used during application. Areas contacted to product should be washed with plenty of water. If swallowed, call for medical, immediately.
QUALITY STANDARD
It complies with TS EN 7847 standard.

AppearanceGray colored powder
Mixing Ratio6-6.5 l of water / 25 kg of powder
Consumption2,7 kg / m2
Application Temperature+5°C to +35°C
Service temperature-30°C to + 80°C
Dwell Time in container3 hours
Dry film thickness>400 um, E5
Grain size≤2000 um
Water vapor transfer rateV2, (15
Water transfer rateW2 (0,1
Çatlak gidermeA0
CO2 PermeabilitC0
Mold strengthK2
Reaction to fireA1

 

en_USEnglish