Energy consumption will decrease with jacketing!
5 January 2019
No Comments
DEFINITION
Acrylic-based, ready to use, UV-resistant, very elastic water insulation material.
AREAS OF USE
It is used for waterproofing on cement-based surfaces and exposed concretes, sloping roofs and terraces, creeks, chimneys and parapet edges.
ADVANTAGES
It is ready to use. Easy to apply. High resistant and very elastic. UV resistant.
SURFACE PREPARATION
Application surface should be clean and free of loosen surfaces and dust, which prevent adhesion. Corrupt surfaces, cracks, and fractures should be repaired with BEYFIX fine repair mortar and BEYFIX coarse repair mortar 24 hours before application. Inclinations on the roofs should be suitable to prevent ponding on surface. Before application, BEYFIX ELASTOMERIC WATERPROOFING MATERIAL diluted at ratio of 1⁄4 should be applied onto surface as priming.
INSTRUCTIONS OF USE
After priming layer dried BEYFIX ELASTOMERIC WATERPROOFING MATERIAL is applied by 3 layers at horizontal and 2 layers at perpendicular surfaces under ambient temperature within range of +5°C to +35°C by means of brush or roller without diluting with water. Depending on ambient temperature, 5-6 hours should be waited between layers and lower layer should be ensured to dry before passing to upper layer. Direction of brush should be in right angle with that of lower layer. It is recommended to use with bevel band or BEYFIX insulation mesh at corners and other joint areas on application area. Surfaces of application should be protected against direct sunlight, wind, and freeze by 3-7 days after application and coated by ceramic at the end of this period.
PACKAGE
In 20 kg of plastic container
STORAGE AND SHELF LIFE
Maximum 4 buckets could be superimposed in closed original packaging and under cool and dry ambient. Shelf life is 12 months under proper storage conditions after manufacturing date. Ambient and surface temperature should be at least 5°C during and 24 hours after application.
SAFETY PRECAUTIONS
Gloves should be used during application. Areas contacted to product should be washed with plenty of water. If swallowed, call for medical, immediately.
QUALITY STANDARD
It complies with TS EN 14891:2012 standard.
| Appearance | White liquid |
| Consumption | 1,5 kg/m /1 mm. |
| Density | 1.40 g/ml |
| Breaking elongation | %150 |
| Application Temperature | +5°C to +35°C |
| Dwell Time for each layer | 5-6 hours |
| Impermeability | ≥7 bar |
| Adhesion strength (at 28 days) | ≥ 0,8 N/mm2 |
| Crack bridging | ≥1,5 mm |
| Capillary water absorption | ≤ 0,1 kg/m2 h0,5 |
| Coating period | 3-7 days |
| Time to become water-proof | 7 Days |
Above given values are valid for ambient temperature of +23 °C and relative humidity of 50%.
"Yıldırımlar Demir Cement", a corporate and domestic organization that has served the industry in the field of building materials supply since the 1950s, has accomplished successful works in many different sectors as a group.
Beyfix Construction Chemicals,
Keskin Organized Industrial Zone 4 Sk. No:8 KIRIKKALE
Tel: +90 (318) 225 20 02
info@beyfix.com
English 
Turkish 
Russian